Join Tangkula Club. Shop. Earn. Enjoy.

Free Shipping within US

Free Shipping within USA


Slide image
Slide image
Slide image
Slide image
Slide image
Slide image
Slide image
Slide image
Slide image
Slide image
Slide image
Slide image
Slide image
CSA Certified

Tangkula Fireplace TV Stand for TVs Up to 65 Inch, Electric Fireplace TV Console w/Remote Control, Overheat Protection

Regular price $369.99 USD
Color
Grey
Earn 370 points
Estimated Delivery

Tangkula Fireplace TV Stand for TVs Up to 65 Inch, Electric Fireplace TV Console w/Remote Control, Overheat Protection

$369.99 USD
ColorGrey/Black
MaterialEngineered Wood, Tempered Glass, Steel
Overall Dimension of TV Stand58"x 16"x 32"(L x W x H)
Overall Dimension of Electric Fireplace24.17"x5.10"x17.52"(W x D x H)
Length of Power Cable6 ft
Total Net Weight110 lbs
Weight Capacity of Tabletop66 lbs
Power Rating1400W
Voltage120V
Frequency60Hz
Heat Output4650 BTU
Heating Area400 Sq. Ft
Adjustable Temperature62-82 Fahrenheit, or 17-27 Celsius
Effective Control Distance of Remote Control33 feet
1 x TV Stand
1 x Electric Fireplace
1 x Remote Control
1 x Instruction

23"Electric Fireplace: This indoor furniture includes a 23"electric fireplace with 4650 BTU so that it can heat the area up to 400 square feet. Meanwhile, the temperature can be adjusted from 62-82 Fahrenheit, or 17-27 Celsius according to your heating needs. And the timer control function allows you to set the desired time in advance. The overheat protection and CSA certification ensure your safety.

2 Ways to Use & Control: The 3D realistic flame effect with 3-level adjustable brightness that can be operated with or without heat, creating a warm atmosphere all year round. And the convenient control panel and included remote control (33 ft effective control distance) allow you to control the electric fireplace easily.

Roomy Storage Space: This entertainment center features a large tabletop, 2 open storage compartments, and 2-door cabinets with 3-position adjustable shelves in the middle, which provides ample space to accommodate different items, such as DVD players, books, remote controls, and ornaments, etc.

Fit 65 Inches TVs: This fireplace TV stand is able to support TVs up to 65" Therefore, you can watch TV while enjoying uninterrupted warmth with a constant temperature design. In addition, there are 2 cable management holes on the back to reduce clutter. And the anti-tipping device makes this TV console safe to use.

Elegant Design: Featuring rustic wood grain on the surface, this electric fireplace TV stand adds a timeless addition to your space decoration so that you can use it wherever you want, such as the living room, bedroom and reception room, etc. And the easy-to-clean surface is convenient for daily maintenance.

Description

Combining heating and practicality as one, this fireplace TV stand will be the perfect choice for you! This entertainment center with 2 cable management holes fit for TVs up to 65" At the same time, it provides spacious storage space for various items thanks to the large table, 2 open storage compartments, and 2-door cabinets with 3-position adjustable middle shelves. What's more, if you use the control panel or handy remote control to open the electric fireplace and set the suitable temperature (62-82 Fahrenheit, or 17-27 Celsius), it is able to heat up 400 square feet with 4650 BTU. And you are able to set the time from 30 minutes to 6 hours through timer control. Moreover, the constant temperature design brings uninterrupted warmth.

Features

  • Adjustable temperature from 6282 Fahrenheit, or 17-27 Celsius for different heating needs
  • The LED red light for the Fahrenheit temperature display
  • The LED green light for the Celsius temperature display
  • Timer control for great convenience and LED blue light shows the time you set
  • Safe to use with overheat protection and CSA certification
  • Based on your space light, adjust the flame brightness to 3 different levels
  • 2door cabinets with 3-position adjustable shelves for different storage needs
  • Accommodate TVs up to 65 inches for entertainment
In the video, the electric fireplace cannot be started, neither with the remote control nor the control panel. What's wrong?

The electric fireplace in your video is lying on the ground. Electric fireplaces have a tilt-activated safety switch that cuts off power if they are tipped over. In this situation, it won't work. Please stand the electric fireplace upright and record another video demonstrating the problem of it not starting.

The remote does not work. I already replaced the batteries.

Please check if the remote control is working properly, you can use your phone's camera to perform a test. Pressing the button on the remote control while using your phone's camera will cause the central LED to flash. If the remote control flashes when pressed, it's working properly. (For infrared remote controls, you need to point the camera at the receiver of the electric fireplace). If pressing the button doesn't cause flashing, the problem lies with the remote control itself. [https://youtube.com/shorts/09jD5X7_tQM](https://youtube.com/shorts/09jD5X7_tQM)

Is this fireplace an infrared?

No, it is heated by heating wire.

Is there a video for replacing a fireplace motor?

Here is a video for you as reference: https://youtu.be/y4kgGmLe-OM

What type of battery does the remote control use?

2 AAA batteries

Does this fireplace require a dedicated outlet?

This fireplace does not require a dedicated outlet, a standard household socket is sufficient.

Does this fireplace have a Prop 65 warning?

No

The remote control for the fireplace isn't working now.

Remote control universal item number
FP10368US-BK part 1 Remote control

Does this firepplace cabinet's have a remote that chages the flames in different colors?

Actually there only have 1 color.3-level Flame Brightness,please check the attachment.

Does the flame image flicker or is it static?

The flame is flickering, not stationary.

Are the logs attached or placed inside. Want to know if I can replace logs with crystals or rocks?

The logs on this one are pre-installed with the product, they are not painted and cannot be replaced with crystals or stones.

Are the logs just placed inside or are they firmly attached? I’m wondering is you could use crystals or rocks instead?

The logs are pre-assembled and attached to the fireplace and cannot be replaced

The temperature has been set, but it does not heat up. If the flame is normal, it will not heat up. No matter how high the temperature is set, it will only work briefly and then there will be no response

Replace the control board

May I know if theres a recessed area in back of unit to go over receptacles to keep the unit flush to the wall?

Yes, it has.

The top part shelf do not have the measurement or dimension.

It is 690.5 * 154 * 360mm, please note that this dimension is the size of one drawer.

I was wondering the height of the unit.

The cabinet is 32inch high and the electric fireplace is 17inch high.

I am missing item number 7 to assemble this.

It doesn't affect the installation, but the load capacity is 20kg instead of 30kg.

Does it have a blower?

Yes

I want it comes to be just flame.

Press the power button and then flame button,press the heater control button to close the heat function ,there will only be flame.

Missing a hinge part E

Send FP10220US-WH-part S

The doors have huge gaps and there are parts in the back that are not straight or lined up

The part 8 and part 9 in the picture attached were installed in reverse. After installed it properly, part 8 and part 9 on both sides should be beyond the door like picture attached.

Buyer says is missing 5 screws, please send A x 5 .

You can send this screw bag.
FP10369US-NA-part S screw bag

missing the handles for the glass cabinets on the side.

Priority to send FP10106US-WH-part F, which is the handle on its own with a separate product code. The handle is inside the screw pack, so sending the screw pack alone is also acceptable. The handle inside the screw pack of FP10220US-WH PART S is also compatible.

The light part works but the heating part will run for 5 minutes then kick off. Customer had tried on every temperature setting. customer used the timer to see if it would stay in but it still does the same thing it kicks off and then will kick itself back on randomly. customer hardly have used the heat on it.

please confirm if the high setting runs longer than the low setting. This fireplace comes with a thermostat. When the surrounding space reaches the set temperature, the electric fireplace will automatically stop heating, and it will restart when the temperature drops below the set level.
Additionally, please kindly check if the air outlet and the back air intake are blocked; lack of airflow could lead to overheating internally. You can try setting the fireplace to the highest temperature to see if it helps.
Also, please kindly understand that the thermostat in the electric fireplace senses the temperature around the fireplace. As the room temperature and the set temperature are very close, and the room is large and not completely airtight, it's not possible for the electric fireplace to control the temperature of the entire room.

One of the two doors does not have a hole for the handle.

Could you try to use a tool to drill the hole by yourself with a partial discount?
Handle hole spacing: 128mm
Through hole diameter 5mm, on the backside a counterbore with diameter 10*2mm

Missing the remote.

Send FP10367US-BK-part V-remote

We found that the fireplace insert cannot be fixed, and many of the panels are missing drilled holes.

Please ask the customer to push the electric fireplace fully into the wooden cabinet. After checking the position at the outlet, just use a power screwdriver to fasten the screws directly.

missing the hardware to put it together. It is the cabinet; it’s the large circles that put in the holes to secure everything.

Send this FP10181US-BN-part S

The heater on the fireplace always display eo & stops putting out heat. Have attempted unplugging & everything I've read to try to fix the problem.

Here are some suggestion:
After power failure, check the position of the motherboard: CN1/ fan terminal, and check whether the connecting cable is loose (pull it out and plug it in again, and then turn it on for heating.
Teardown video: https://youtu.be/T8OJES7TOKs?si=V6cYUGOQYNIDY6UW
E0 repair video: https://youtu.be/RHEkBrgJFUs?si=s9YaMvX1wASviKi_
Can you please try according to the steps?

The fireplace will heat up for a few minutes, then shut down and display an EH code, then start heating up again.

You should first check if there is any electrical equipment around the product that generates heat, and remove it if there is. Then unplug the product, let it cool down for a while, then plug it in again and try to turn on the heat.

tried turning the fireplace(heater) on with both the remote and at the unit itself and nothing comes on the fireplace insert including panel display, flame display and fan. I also checked my outlet for power and it has power.

After power-off, Could you please check the position of the motherboard: CN4/button board terminals to see if they are loose (unplug and reinsert)
Disassembly video: https://youtu.be/T8OJES7TOKs?si=V6cYUGOQYNIDY6UW
Repair video: https://youtu.be/NqAflWlAglc

How to get C off

For how to remove part C,Turn off the cross screwdriver and turn it counterclockwise to come out.

missing the hinge

we can send you the screw bag,which including the hinge you need.

the fireplace is all good but its stops giving heat theres ED cho showing and he trouble shoot already but still the same its not giving heat

Disassemble and check, re-plug the CN1/blower terminals and try turning on the heat again Tear down video: https://youtu.be/T8OJES7TOKs E0 repair video: https://youtu.be/RHEkBrgJFUs

The lights come on but there is no heat coming from it.

Please dismantle the fireplace and then reconnect CN1/blower terminal (please see attachment). Then check if the blower works.
Here are a video about how to dismantle the fireplace for reference: https://youtu.be/T8OJES7TOKs

The heater and light up part just stopped working, tried unplugging and plugging it back in and nothing. Plugged phone charger into the outlet and it charged my phone so the outlet works. All electric parts of the fireplace randomly stopped working. What should i do?

Disassemble the machine for inspection and try reinserting the CN4/button board terminals
Disassembly video: https://youtu.be/t8ojes7toks
Inspection video: https://youtu.be/nqaflwlaglc

What type of heater is equipped with a 58 inch fireplace cabinet? Is it an infrared quartz tube?

Heating wire heating, not infrared quartz tube

Missing door handle F. Is that separate or in the screw package?

It's in the screw bag.

Do you have an assembly video?

Here's the assembly video: https://youtu.be/-nB9RfEN0XE

We would like to know the dimensions of the shelves above the fire place please?

Please see attached picture.

Does this need assembly?

Yes.

The Electric Fireplace TV is not working and appear E0.

E0 code means the fan does not operate normally, which may be caused by the fan terminal falling off.
You can check the item as following steps.
1. Remove the 5 screws of the glass surface frame, and take out the glass surface frame as shown in Figure 1 and 2 below;
2. Remove the two screws on the left and right sides of the fireplace, and take out the projection plate and the decorative log assembly, as shown in Figure 5 and 6 below;
3. Check whether the black terminal of the red and black 2-core lead on the motherboard is loose (CN1 position). If loose,
Insert it again to recover, as shown in Figure 7 below;
4. According to the disassembly of the opposite steps to install all the parts, the third step - second step - first step.

Can I run the flame witout having the heat on?

Yes, you can.

Cx is missing part #7 - 1 piece. Box was received in good condition.

It's just an extra reinforced support, it doesn't affect normal the use

Does this 2 in 1 fireplace and TV stand have a separate fireplace in sold?

Yes,the sku is FP10194US-BK.

The electric fireplace has no temperature digital display, just the word “On”

Press and hold the heating button on the remote control for more than 5 seconds, and then select the temperature by adjusting the button up and down.

The fireplace won't turn on at all。There's no error message, we have tried to manually turn it on as well and it won't work.

Need to check if the position of the motherboard: CN4/ key board terminal is loose like the attached shows.If still have problems,please contact us for further help.

I unplugged for 5 minutes. Ran fireplace, than E3 error began flashing and heat doesn’t work unless unplugged, than it works again for a bit before doing the same thing.

E3 means T_FUSE terminal is loose.could you pls have a check as below?
1. Remove the five screws of the plastic glass face frame, and take out the plastic glass face frame, as shown in picture 1 attached.
2. Remove 6 screws of the hardware decorative frame, and take out the hardware decorative frame, as shown in picture 2 attached.
3. Remove two screws on the left and right sides of the fuselage, and take out the projection board and the dummy wood assembly, as shown in the picture 3.
Here's the T_FUSE terminal,it's on the above of picture attached.Pls try to tighten it.
If it can not help,pls also contact us back with details then we can provide you further assistance.

What is the heat?

323 SQ.FT